As a general rule, the front bumper should be removed to install the safety net on the heat sink. However, there is an opportunity to install a grid without dismantling the bumper. The grid needs a little honeycomb to stop even small stones.
The first thing to do is to open the hood and rotate four top retaining pins, as shown in the photo.
After that, a little bit of the bumper from which the bolts were turned off and the hand latching the top grille latches. Begin with the last release latch (on any side).
When the upper release latches are released, the lower arm must be lowered and the lower latches release the lower release latches.
She'll just pull the bars on himself so she can come out.
Now there's enough free space to mount the grid.
All you need to do is cut the grid in the bottom and top grid and lock them through plastic shomas, as shown in the photos.
The end of the hamster's got to bite off the bite. You can smoke a little bit.
The assembly is in reverse order.