The Lada Largs is not always available for sale. Alternatively, the Belarusian gas emphasis of the company Fenox can be installed. It is necessary to find a model for Lada Niva (now-Lada 4x4).
The times are fixed to the posts as indicated in the image. No additional drilling is required. You have to install two pillars, because one cannot handle the weight of the bonnet. Before tightening the bolts, it is necessary to lubricate the blue striker, otherwise they will be flunked from the vibration. More powerful supports are not recommended because the bonnet will be opened very quickly and can be deformed over time.
The arrowheads will have to be redesigned from 8 mm. 6 mm in. This can be done in any shop-room. It is not necessary to change the holes in the hood, as there may be rust hotbeds in this place over time.
In red, bolts, the bolts should be replaced by a flat-head, otherwise the gas support will be locked into a standard bolt and interfere with the normal closing of the bonnet.
To install the top of the pylon, you need to twist the top of the bonnet to each side.
and twist the tip of the anvil. Shayu don't need to use it.
It is necessary to plant a wide puck at the tip of the tip under it.
The gas-points themselves must be set with a currents down, so the sealing ring will lubricate the oil and not disband over time.
