Adjust the locks simply. You will need an asterisk (TT40) to unwind the brackets and the hammer. Start the adjustment from the front doors (driving, then passenger) and then switch to the rear doors. All doors other than the regulated door shall be closed.
Next, you remove the two rack-mounting brackets and move the clip to the bottom position with the hammer. The top bolt needs to be a little "spin", and the bottom bolt is not to be drawn. Next, move the bracket up (step = 1mm) by tapping the lower bolt with the hammer, and then checks the top bolt to see if the door closes. When the result is reached, both bolts must be completely turned on.
