The attachment of the hinge door of the back of the Honda CR-V III is placed under a plastic cover. It must be removed by a flat-blade screwdriver or other suitable instrument. At the end of the loop there were points for adjustment, and on near the noose, there were three in four places. You need to looser the two screws that hold the loop. It is then necessary to adjust the hinge position so that the adjustment points on it are aligned with the centre rods on the right and left, tighten the screws, and return the plastic cover to the place.
As a result, the lock shall be part of the cordon without skewed and deflections, and the door of the boot shall not be locked in a closed position. The luft can be checked by closing the door and by shaking it over the edge of the handle. The hatch can be removed by the rubber door by a quarter or half-turn.
