It is necessary to remove the railing itself before the rails are removed. The rails are secured by large, hexagonal screws. You do not need to touch the plastic part of the front. After all the screws are removed, you need to remove the plastic part from the back and pull the reeling back so that it comes out of the front plastic. These tunnelers can pull off when you wind up the screws. They need to be re-pressurize in front of the assembly.
- You do not need to touch the plastic part of the front. The guide enters this plastic part.
- After all the screws are removed, you need to remove the plastic part from the rear and pull the reeling back so that it is removed from the front plastic.
- There are support rails planted on the sealant under the rail. These tunnelers can pull off when you wind up the screws. They need to be re-pressurize them before they can be assembled.
- The screws also need to be curled on the sealant.
