To remove the front bumper by car Citroen C4 with PTF/DRL washer, you need to: You can drop the glass and open the trunk. Wait for five minutes and turn off the JSCB. If you don't have it, you can put it down. If you don't have a plastic beater, you can unplug the plastic beetle. Dismount a chrome-plated heat sink by squeezing flat pliers with a plastic pilon, so that he can get out of the bracket-plate and two screws at the top of the plate. The top three of the bumper sticker bolts to the grille. It's got the first two piles of the fender tipping off the top of the bottom of the wing. turn off one electrical outlet in the middle of the bumper and gently pull the bumper over it.
- Lower the glass and open the trunk.
- Wait five minutes and disable the CCM with the "-"-"mm".
- If there are no lamps on the bumper, you can omit these actions.
- Detach the plastic piles of the cover.
- Unmount the radiator's chrome plating with flat pliers of plastic groping, so that it can get out of the fastening bracket.
- Roll out the license plate and two bolts.
- At the top of spin the three bolts on the bumper to the grille.
- In the wheel arches to remove the first two piles of the fastening of the locker and twist the carrot.
- Squeeze the plastic border of the wing from the first two latches, unscrew the saloon at the end of the wing, and press the edge of the bumper from the latches at the point of the anchorage to the wing.
- Detach from the bottom 11 plastic pistons on the bumper.
- Disconnect the hose, cut off one electrical outlet in the middle of the bumper, and gently pull the bumper onto itself.