The removal of the rear bumper to the Chevrolet Cobalt is carried out in such a sequence:
(1) Take back lamps.
2) Disconnecting rear coverings from the bumper.
3) Take off the piles of the left and right edge of the bumper to the body.
(4) Separate the right and left side of the bumper from the bodywork by removing them from plastic holders.
(5) A screwdriver by three retainer tabs under the left lamp and the left side of the bumper.
(6) The illumination of the licence plate illuminating shall be disconnected.
(7) Similarly, the right part of the bumper is withdrawn.
(8) Pull the bumper over and remove it.
(9) Remove the bumper amplifier.
(10) The installation shall be performed in reverse order.
