To remove the leaks around the windscreen of the Chevy Captiva, you can do the following:
1) Remove the decorative molding and some internal plates may be necessary for this to be removed.
(2) The glass at the place of the leak is sprawled and then carefully pressed from the inside to determine the size of the leakage zone.
3) Clear and dry this area.
4) With a sharp knife, cut the roughness of the adhesive layer around the leak at a distance of 10 cm on each side.
(5) Rough-cropping zone. And wait for it to dry.
(6) Adhesive coating and 10 cm away distance from each side.
(7) Presocement the glue into the connection between the body and the glazing material.
(8) Heat up the warm water from the repaired area for the leakproofness test.
9) bet on the bezel and the molding.
