Many drivers underestimate the role of wipers in ensuring safety during traffic. In fact, the clean windshield wiper is an important parameter that needs to be carefully monitored. If the caretappers suddenly stop working, it is necessary to understand the causes of the malfunction and eliminate them as soon as possible.
The failure of the windshield wiper may be different, respectively, and the causes of the failure may vary according to the "symptoms". So, here are the core signs and the reasons why car yards don't work.
The caretans don't work, the sound of the motor is not heard. The problem is most likely to be found in the gearbox. To test the electric motor that drives the windshield wiper, it needs to be removed. First, we need to check the safety on the motor itself (it can either be directly in the engine or somewhere near it). The wipers need to try to plug in directly from the battery: if the engine does not "live", it is the problem. Moreover, the engine does not need to be replaced more often: it can be overrun by replacing the brush or lubricating the entire mechanism. If the scooter is in error, the reason may also be in the padded check box or in the transaction. Check the background check box using a tester: disable the wire of the wipers and connect the tester to check the presence of voltages for the caretans.
Wipers not operating when the washer is turned on. As in the case above, the problem is most likely in the switch and the transaction. They should be checked on the same basis.
The motor is buzying, and the caretans don't work anyway. In this case, one can definitely say: the motor is a rarity, but it has no contact with glass-cleaning agents. The most common cause of this failure is the wear and tear of the grating shaft of the motor cycle or the broken nuts of the trapeze to the motor gear. And if the second reason is easy to determine, only by looking at the trapeze, the first one can be diagnosed only by examining the motor. By the way, it can be difficult to buy a gearbox motor, so most often the car owners prefer to change the entire motor pool's collection.
The janpers work very slowly. There are cases when wiper blades do perform their function, but they move very slowly even in the fastest way. The problem is most likely in the absence of lubrication or rust within the mechanism. First, it is necessary to remove the trapeze in its entirety and to thoroughly process the lubricant all the movable components. If it doesn't help, we need to disassemble and disassemble the retractor engine, then thoroughly clean it from the dirt and lubricate it.
The nobles don't come back to quiet. There may be more than one reason for this failure. The problem most likely is that you have already dealt with the trapezoic or the motor, after which the caretakers have been misplaced. Moreover, the reason that windshield wipers do not return may be a failure of the circuit breaker switch (in which case the motor is likely to have to be replaced) or damaged brushes.