Many of the manuals suggest dismantling the direction indicator by moving it forward and pulling it onto itself, similar to Volkswagen's cars. But thus, the blinker will not work because of another anchorage.
To remove the flame and replace the lamp, it is necessary to: To turn the wheel so that the back of the plastic cover is accessed from the side of the plastic. It is necessary to twist 2 amorphoses on the front side of the plastic arm and push it so that the arm is reached. Next, you press on the grind and push it out. The assembly line is the reverse.
- Rotate the wheel so that the rear side of the plastic cover is accessible on the right side.
- You have to twist two samoras on the front porch and pull it off so that a hand gets in the wing.
- Then press the turning signal and push it out.
- It will only help to understand the background and replace the lamp.
- The assembly is in reverse sequence.