The filling units for xenon lamps shall be 50 watts the same as consuming a halogen lamp. If you purchase 35 watts, you can consistently look and attach a resistor resistor 1 kOm with a power of 20 W (55 watts per unit). Otherwise, the onboard computer might fail.
1. Space for work is being prepared: the air filter cover, the filler panel and the fuse box are removed.
2. The lamp shall be drawn. To do this, you have to unscrew the protective cover of the headlights, pull a 45-degree lamp and pull it off, disconnect the wire.
3. A lime block and a bag of rozhiga are attached to the china block with plastic fasteners.
4. A hole in the protective cover shall be removed. The size of the welder must be picked so that a chip from the xenon lamp is located in the hole. If necessary, you can expand the hole with a knife.