To adjust the headlamps, a car must be placed on a flat ground in front of a wall or a fence about three metres.
Slight the distance from the ground to the center of the lamp of every headlamp and measure these points on the wall. Two dots have been established, the line is through them and the light of the headlamps will be acceptable.
Open the hood, including passing beam headlamps (not authorised).
The position on the headlights of the headlights, on the left and right, respectively. The hexagonal key can be rotor the screw clockwise to lift the lens, or counterclockwise-for lowering the lens. The line of light needs to be aligned on the wall.
The leveling screws of the headlamps tilting horizontally without having to spin off are not recommended-in most cases, the leveling is correct.
