To remove Mitsubiši Padero 4 to switch the lamp in it is easy. To remove the Mitsubishi Pajero IV, you must do the following: To remove the Pajero headlamp, you need to remove the grille that is attached to the bottom of the clip. Next, you should unscrew the top bolts and the retaining bolt at the bottom of the bumper. Then, remove the back portion of the clip from the clip. Then, you need to reattach the headlamp to the bumper and remove the clip. Now it is necessary to turn the mounting bolt on the side of the bumper (access to it is limited, the head and the small crack, as well as the 6-hedron can be adapted, as shown in the photo below)-this is the last place to be removed, then the headlight can be removed.
- To remove the Pajero headlamp, you need to remove the grille that is attached to the bottom of the clip.
- Next, you should unscrew the top bolts and the retaining bolt at the bottom of the bumper.
- Then, remove the back portion of the clip from the clip.
- Then, you need to reattach the headlamp to the bumper and remove the clip.
- Now it is necessary to turn the mounting bolt on the side of the bumper (access to it is limited, the head and the small crack, as well as the 6-hedron can be adapted, as shown in the photo below)-this is the last place to be removed, then the headlight can be removed.
