At times Mazda 3 does not function as a windscreen wiper, with all the washer and the back "caretaker" working.
The first thing to do is to check the fuses in the compartment unit and under the hood, they must be whole. If all the fuses are in order, we need to proceed to the next step.
We need to remove the wipers from the rubble. To do this, you must have a screwdriver to the slot cover. There are nut clips on the top of the cover and need to be untwisted. Next, we need to find the chandeliers next to the caretkers, unscrew the two smores with a crusade and snack the wipers together with the winders. Next, we need to remove the seal and plastic cover. It is necessary to take it off carefully, swinging a little on the side so as not to damage the chipset. The entire structure of the glass-lift mechanism, trapezoic, two propulsion and motor, is hidden under the cover. We have to remove the motor and clear the tatters on it. Most of the time, it's just a quad of a sticky glamour appropriate to the motor.
If you have not helped clean up your contacts, you need to replace the motor. The assembly is in reverse order.
