A flat-blade screwdriver and cotton gloves are required to replace lamps. There are fillers on the rear of the headlights; they need to be removed by checking the left. Behind the pluffs are the plastic arrowheads of the passing lamps and the position lamps. First, we need to remove the tip from the passing lamp. Then, pressing the spring, you have to pull out the passing lamp itself.
Then you can go to the gauges. To do this, remove the plastic tip of the lamp with the lamp. This can be done with a flat-blade screwdriver (need to be fused and released). Working with lamps is necessary in gloves, so as not to take them with their bare hands beyond the glass surface. The assembly is in reverse order.
