The removal of the airbag at Audi 100 P4 is a dangerous procedure, so it needs to be carried out with precision. Procedure: Disconnect the battery. Disconnect the connector and insulate the electrical power pole (located either at the front or above the front-passenger's foot).Disconnect the airbag assembly from the rear of the rudder by using the T-30 key. Attach the airbag assembly to the rear. so that you can see the logo. Remove the top of the panel of the steering column and unscrew the two lower screws. Disconnect the connector of the airbag module. Take the steering wheel in the locked position. Let' s put the steering wheel on the steering wheel. We take the wheel straight off. We take the wheel straight off. The steering wheel is in reverse sequence.
- Disconnect the battery.
- Disconnect the connector and insulate the voltages power pole (located either at the front of the front or above the front passenger's electronics).
- Disconnect the airbag assembly from the rear of the rudder with the T-30 key.
- Put out the pillows block back.
- Detach the safety bracket and the connector from the drawer.
- Put the block away so that you can see the Audi emblem.
- We remove the top of the steering column panel and remove the two screws at the bottom.
- Disconnect the wiring connector for the airbag module.
- We're taking off the sound button.
- Put the wheel in the locked position.
- The head of the "22" dike of the steering column.
- Put the wheels straight on.
- Let' s get the nut and the puck off.
- The movement of the steering wheel is removing the steering wheel.
- Installation is in reverse sequence.
