The installation will require the VAZ-2110 blinkers and the gaskets for them, as well as the following tools: a screwdriver with a flat sash, a grating and a knife. Use a thin screwdriver to squeeze the metal petal-place of the rotation. Remove the turning signal from the mounting hole. Then disconnect the cartridge and remove the light from it. You also need to get a cartridge from the VAZ-2110 rotation and cut off the plastic ponytail that is designed to separate the contacts. Install the cartridge from the VAZ-2110 in the Getz cartridge. Also needs to be further developed from VAZ-2110: cut off one ear of the anchorage (adjacent to the plastic cylinder), also in the plastic cylinder itself, make a small hole (from the cut edge). Install the gasket. Gather and install the blinker.
