The shale, which is located under the air supply adjustment knobs, is designed for the recycling of air in the salon (left position) or by air intake from the street (right position). The white band on the knob is not lit on the handle. And it's very uncomfortable, because you can just forget about the open plank and freeze the salon in the cold time of the year. Here are several ways to make a light on the handle of the splits:
1. Make a mark on the handle by means of phosphorylating paint. But waterproof inks of this type are rare in sales.
2. A small portion of the retro-reflective film shall be taped to the handle.
3. decorate the handle with a phosphorous varnish. It can be purchased at a fishing convenience store.
4. At the end of the central tunnel, two LEDs of green colour shall be fixed. This way, you can light up the baking rods. You can provide power from the heater buttons.
5. The next option will require the dismantling of the central console. Take two LEDs. For example, red for recycling, and blue for fresh air. Glue the LEDs off with the plastic lining and the plastic parts. The power can be pulled from the illumination of the display magnets.
