Not all cars have the automatic lowering function and the lifting of the glass for the driver's door. Many have only the stack walk down. The window of the lift window will need to be further developed in order for the glass to be automatically omitted, but also to be raised.
Remove the screw in the driver's license card next to the buttons and remove the box with the buttons. Then disconnect the connectors of the window-lift unit and adjust the side mirrors. Remove the window-access control block out of the common enclosure. Remove the unit of the window-lift button: remove the only screw and lift the rear cover.
On the bottom side, you need to add a jumper that locks the unused second position of the window's lift button and the signal entrance of the controller to the driver. Cut the delimiter that does not allow the lift button to be placed in the "up" position. To do this, remove the button carefully and gently pull the lateral fastenings. Cut the box cutter and gather the button. The button will have more free moves. Gather everything in reverse sequence.
