To replace the windscreen wiper engine with the Honda Civil 8: Open the hood and lift the wiper blade and remove plug. Then remove the pads and the panel under the wiper blade. Unlock the connector "5P" from the wiper blade. Unlock the wiper blade from the wiper blade. lubrication on all the moving parts. Before installing the wiper blade wiper, turn off the wiper blade so that the wiper blade returns to rest position. If necessary, replace all damaged tabs. After installation, adjust the windshield wiper.
- Open the hood and remove the flaps, nuts and bolts of the wiper blade.
- Then remove the pads and panel under the cover and unscrew it.
- Then disconnect the "5P" connector from the windshield wiper and remove the traction by unlocking the six rack-mounting bolts.
- Remove the lever and thrust of the windshield wiper, turning back the attachment nut.
- The label on the lever shall be aligned with the wiper mark.
- Then remove the traction motor wiper from the engine by unlocking the three rack-mounting bolts.
- Install the engine in reverse order.
- If you are installing, align the marks on the lever and the drive train.
- Apply a universal lubricant to all the moving parts.
- Before setting the wiper blade wiper with brushes, enable and turn off the wiper, so that the wiper blade returns to rest position.
- If necessary, replace all damaged tabs.
- After the installation, adjust the windshield wiper.
