To replace the HID block on Honda Civil 8: Turn off ACB. Remove the headlamp assembly. Then remove the HID.Remove HID light from the HID unit by removing the three screws. Installing the HID block in reverse. After attaching the JSCs, enter the audio code for the audio system and set up the radio receiver at the pre-configuration station.
- Disable the KB.
- Remove the headlamp assembly.
- Then remove the cartridge from the high intensity HID.
- Remove the HID block by reattaching the three screws.
- Installing the HID block in reverse order.
- After the PSC has been connected, enter the audio system codes and configure the radio receiver at the pre-configuration station.