On the Hover, it is possible to install headlights using spare parts from VAZ vehicles. The budget will be very modest. It will require two rear window washer heaters from Hover, two windshield washer-glass pump-2109, a windshield washer button of the classic family Lada (2105, 2106, or 2107), a three-litre jerry can, a fuses, a fuse, a gafra, a wire, a wire, a wire, a hose, a tee, a tee, a tee, a pair of stainless steel hoses, a couple of stainless steel hoses with a diameter of 130 mm.
The canister that will be playing the role of the washer is slandering and sealed with a waterproof seal. Then loosening the retention of the hydroamplifier and moving it from the heat sink. In the area of contact the tank with the body should be applied to the madeline or similar material, which will prevent the abrasion of the tank. The tank itself is installed to the right of the heat sink under the water-amplifier. Then it is possible to anchor the hydraulic amplifier to the old place. Pumps are mounted on the flock.
The next step is to check the holes in the bumper. Before that, you have to remove the headlights. You need to click on the bumper and put it on the sealant. Next, the nozzle must be connected to the pumps. After that, you will only have to connect the power, install the button, and the fuse to 5A. Thanks to the fact that two pumps are used, it will be strong, and the mud will be baffled well.
