The wiper adjuster was installed only on cars in the Ghia installation. For vehicles manufactured before 2001, it is sufficient to set the switch with the controller to make it work. In addition to the new switch, the other machines will have to build an extra wire.
The sedan requires a switch with the number 1097539 and for the hatchback and station wagon-1097542. To replace the switch, remove the top cover of the steering column (it is placed on the latches), push the retainer on the inside of the switch, and pull it up.
Contact #1 on the switch must be connected to the contact in the reception slot in the box behind the box. We need to contact the second from above in the right row (the slot is free).
