After you turn off the battery, you need to restore the settings of the window-lift algorithm.
To begin with, you need to lower the glass. Then, hold down the key and release it when the glass is completely closed. Next, you need to lift the key and hold it for a second. Then you need to lower the glass while holding the key until the glass falls completely. Now you need to pull the glass again completely while holding down the key.
Then, you need to lower the glass and try to close it with a single keystroke. If the glazing is not fully raised, the procedure must be repeated.
When you are working, you must be careful, because before you restore the settings, the protection function from the latch will not work.
