The replacement of the lamps in the rear lamp of the Chevrolet Cobalt is carried out in such a sequence:
(1) Scrolls the two rear-lamp retaining screws.
(2) Move the flashlight to remove the plastic flashlight.
(3) Remove the rubber sealant and move the lamp away.
4) Use a screwdriver to disconnect the wire from the connector.
(5) Take off the lantern.
(6) Three screw of the lamp holder.
(7) Clamp the four latches and remove the holder with the lamps.
8) pull out an unpowered lamp by pressing on it and turning counterclockwise.
9) Put a new lamp and collect a lamp in reverse sequence.