There are several ways to control the operation of the reversing sensor on the Ford Mondeo III: Remove the JSCB and air filter. Next, disconnect the connector, unplug the sensor, back up the sensor. In the opening of the sensor, drop the wire and use a screwdriver to lift the power-on mechanism up. The cause of the sensor problem may be a balloon hang-spin off the sensor, fix the ball. Scatter a beetle screwdriver at the top of the sensor and reach it in a circle. Remove the plastic part with the connector, clean up the sandpaper with two contacts. Collect the sensor. The metal and the plastic will miss the sealant.
- Remove the JSCB and air filter. Next, disconnect the connector, unplug the sensor, back up the sensor. In the opening of the sensor, drop the wire and use a screwdriver to lift the power-on mechanism up.
- The cause of the sensor problem may be a balloon hang-spin off the sensor, fix the ball.
- Scatter a beetle screwdriver at the top of the sensor and reach it in a circle. Remove the plastic part with the connector, clean up the sandpaper with two contacts. Collect the sensor. The metal and the plastic will miss the sealant.