If the Ford Mondeo III pump does not pump the liquid out of the bacht, it is likely the problem in the oxidized contacts of the bow switch. To gain access to the right hand switch, you need to open the cover (cover) behind the steering wheel by unlocking the two clips of the attachment. Then, click the clip-on switch and lift it up in the slab. It is recommended that you remove the connector from the electrical outlet. It is recommended that you bring home and sit at the table quietly at the table. Open the box next to the box: unplug the perimeter clipps by using a thin screwdriver. Remove the plug from the oxidized fork. Clear the plug and pin contacts using a screwdriver and degreasing the plug on the plug and their landing slots on the tower. Collect everything in reverse order.
- To access the right-click switch, you need to open the cover (the cover) behind the steering wheel by unlocking the two fastening clips.
- Then, click the clip-on, and then lift it up the sled.
- Disconnect a friend switch from an electrical outlet.
- It is recommended that you remove the beetle check box to bring home and sit quietly at the table to repair it.
- At the home, clear the box: click the perimeter of the enclosure using a thin screwdriver.
- Eject from the shell with oxidized contacts.
- Clean the plug and pin contacts in the shell with a screwdriver and disengage the plug from the plug and their landing slots on the casing.
- Collect everything in reverse order.
