To change the antifreeze to the Toyota Land Cruiser 200, you need to:
(1) Remove the front rear wing (s) of the wing.
(2) Remove the protection of the engine.
3) Loosen the heat sink faucet
(4) Uncap the radiator cap and drain the coolant to the prepared capacity.
(5) Roll 2 discharge corks in the cylinder block and drain the engine.
6) Stop the engine cork at a time of 13 Nm and manually fuse the heat sink.
(7) Fill the new coolant to F level.
(8) Click the heat sink hoses multiple times.
(9) Heat up the engine to the operating temperature and check the level. Repeat paragraphs 7 and 8, if necessary.
(10) Place all in place.
