A common problem with Liffan Smiley is a coolant leak. To eliminate it, you need to pull the chomuts on the chilling system. The second main cause of the leaks is the broken valve in the heat sink. Due to this, there is no normal system pressure regulation. To repair the cover, do the following:
- Remove the heat sink
- Gently push the plug and get the cork.
- Put a piece of paper on the table and take off about 1mm of a facade.
- We're gonna get the cork back-the pressure's gonna be fine.
You can also just cut off the valve from the lid.
It should be noted that in this case the pressure in the system will be equal to atmospheric-this in conditions such as mountainous terrain can lead to the dipping of antifreeze already at 100C.
