During the discharge of water, it is necessary to pay attention that diesel fuel does not fall on the hoses of the cooling system. If the fuel has been hoses, it must be removed immediately. The first thing to do is remove the pressure clamp and remove the valve from the attached fuel line.
- The first thing to do is to remove the pressure and remove the control valve with the attached fuel line.
- Then we need to reduce the cork of the drainage hole and wait for the fluid to drain.
- After that, the valve and the jam shall be tightened and the cork shall be tightened.
- In conclusion, it is necessary to press the gas pedal several times and make sure that the fuel passing through the transparent tube does not have bubbles.
