To remove the oil pan on Mazda 3 (I), you must: Remove the oil pan and the oil pan from the floor pan and the oil pan. Remove the oil and dirt from the ground floor pan and the oil pan.
- Disable the KB, remove the bottom cover, and drain the oil.
- Then remove the oil pan itself, the netted filter and the sealing ring.
- Remove oil and dirt from the body and oil pan.
- Remove the remainder of the old sealant from the oil pan-pan bolts.
- Apply a silicon sealant with a thickness of 2.0 to 6.0 mm.
- Then tighten the bolts between 7.8 and 10.8 Nm.
- You can get the motor oil.
- Start the engine and make sure there is no oil leak.
- Check the oil level and install the bottom cover.