The tools will require a splash-screwdriver, a 10-key ring, a cloth, a knife, and a silicone grease. It's desirable to work on the cooling engine so as not to burn your hands.
You will need to perform the following steps:
1. Dismantling the intake manifold.
2. Turn off the battery's minus.
3. To unscrew the attachment of the coolant of the coolant.
4. Delete the air duct.
5. Disconnect the duct power connector from the duct.
6. Remove the chilling system from the side of the cooling system and remove the lower air duct.
7. Disconnect the wire from the duct to the duct and remove it.
8. rotate the four bolt bolts by 10.
9. To pull off the plate, which was held with two of the four bolts, to get the throttle.
10. Disconnect the throttle connector. He's sitting tight, most likely he'll have to put a knife on one side, then the other.
11. To provide the rubber sealing ring and inspect it for damage.
After installing a new throttle, idle engine speed may be unstable for some time, then everything will become normal.
The number for the original throttle order is 04891 735AC.
