One indication of malfunctioning of the engine is normally that the engine does not gain momentum (as many motorists say). The reason why the engine is not gaining momentum can be very much, the exact diagnosis can only supply the experienced diagnostician, but the initial check can be done on its own. So, why doesn't the engine speed up? The engine's not picking up. What's the first thing to check?
The engine's not picking up. What's the first thing to check?
Fuel system. Usually, it starts with the check of the reasons why the petrol or diesel engine is not gaining momentum. In the case of a petrol engine, the condition of the gas pump should be checked first, whether it is mechanical or electrical.
The diesel engine is starting with injectors, because it is the most likely cause of the engine power loss. In addition, the potential for air fuel in the fuel system should be eliminated.
Both the petrol tank and the diesel engine should check and replace the fuel filter as far as possible, as it could be clogged and influenced by the engine thrust.
Ignition system. Start by checking to see if the engine's three. Then remember if the belt or the GRM chain had recently changed. Very often the belt or chain of the EMG is set incorrectly, which makes the engine not speed up and "blunds".
In addition, the wires and candles should be carefully examined to ensure their integrity and integrity. The engine traction may also be affected by the failing sensor (MRI, DXX, Colenwall Sensor, Sensor Sensor, throttle position sensor, etc.).
Air supply. Another common reason why the engine is not gaining momentum is the airflow to the cylinders. In addition, the air filter should be checked and replaced if necessary.
Exhaust system. Many cars have a significant catalyst for traction, so that the exhaust system should start with the catalyst (if any).
Another very common reason why the engine is not gaining momentum is bad fuel. If you have refuel at an unknown gas station, perhaps the problem is as a fuel.
If all of the above is normal, it is better to consult experts who can pinpoint the cause of the malfunction in a more detailed study.
