Checking the steersman's wheelhouses at Toyota Avensis 2

To check the functionality of the wheelhouses, do the following: Apply the labels to the tip and the drive for the correct alignment in reverse installation. It shall be between 0.5 and 3.5 Nm (models with the GRM) and 0 ,3 ... 2 (models with EID).

1. Apply the labels to the tip and the drive for the correct combination during the reverse installation.
2. Unwind the stop nut and remove the tip.
3. Secure the nozzle in the vice.
4. Bend the nut to the finger of the hinge.
5. With the help of a chassis dynamometer, rotate the nut with a frequency of about 1 rotation in 3 seconds.
6. I'm measuring a 5-th-turn moment. It shall be between 0.5 and 3.5 Nm (models with the GRM) and 0 ,3 ... 2 (models with EID).