The replacement of the oil in the automatic box shall be done as follows:
1) With the help of the "on 17" head, the four screws for the protection of the ACPR's crankcase are uncrunted.
(2) Next, remove the plastic protection of the engine. It is attached to the bumper and several clippers to the bumper and to the rear.
(3) A hexagon "by 10" unplug the cork screw cap, having previously put the receptacle under the drains.
4) After discharge of oil, curvature of cork in place. It would be desirable to change the compaction ring.
(5) The key "on 10" unscrews the automatic box crater bolts. The crankcase will also need to remove the metal part that is fastenfastable to the four screws.
(6) Carefully remove the crater so as not to be oil-free.
(7) Filter and change ACPR filter (number 35330-28010).
8) Put a new pad (35168-21011) and place the crater in place.
(9) Install all other details on the ground.
(10) A new liquid (08886-02305) is poured through the probe for the probe.