To replace the operating fluid in the ACPR at the Toyota Prius, you need to: Then it is necessary to pump the new working liquid with the marking of T-IV through the filling line to the bottom of the "COOL" range. After that, you need to start the engine and, while the machine is locked, switch the automatic selector to all positions, holding it for 3-5 seconds in each. After that, check the level of the liquid and, if necessary, report it.
- Scroll the drain port and drain the fluid.
- Then, install a new pad and twist the cork hole.
- Then it is necessary to fill the new working liquid with the T-IV marking through the bulk tube to the lower "COOL" range.
- Then it is necessary to start the engine and, while the machine is locked, switch the selector of the "machine gun" to all positions, holding it for 3-5 seconds in each.
- After that, check the level of the liquid and, if necessary, report it.