The gas pump is under the rear seat of Peugeot 206 and is closed by the protective cover. You must disconnect the battery terminals before dismounting it.
The gas pump must be disconnected from the supply pump and the dissipation of the retainer of the retainer, and pulling them aside. The next step is to remove the electrical outlet by pulling the tab up and pulling it up. To gain access to the gas pump, you need to twist the sentry ring in the direction counterclockwise by pressing it down. There is a tight rubber band that also needs to be removed. Then it will be possible to remove the gas pump by turning it and pulling it up. To extract the pump, you can purchase or make a controlled lift.
In the installation of the pump, a new gasket will be needed. After the installation of the pump and the new gasket, it is necessary to twist the anthem ring to match the label. After that, the ring needs to be turned on, so that the tags are aligned. The cells and tubes are installed back to the last queue.