We're changing the EMG to Opel Vektra B in this sequence:
(1) Air filter assembly shall be removed.
(2) The belt of auxiliary units shall be removed.
(3) Raise the right front and remove the wheel.
(4) Remove the protection of the engine and the shelves.
(5) Take off the wheel of the wheel.
(6) Hits the upper and lower housing of the GRM-belts.
(7) Strip position sensor shall be removed.
(8) Rotating the wheel pin of the wheel to the wheel and by turning the wheel of the cylinder in the cylinder of the first cylinder.
9) Loosen the tension roller and remove the belt of RMU
10) Change the rollers and install a new belt by label.
11) Put the pull indicator in the "new belt" position.
12) Turn the wheel of the wheel into one revolution and check the validity of the belt's labeling and the tensioning of the belt.
(13) Install all back
