Select your language

The procedure for replacing the antifreeze at Mitsubishi Padero 3 is as follows:

(1) Cooling coolant. To do this, first unwind the radiator bar cork and then the cover.

(2) Unscrew the cork of the cylinder block and merge the remainder of the antifreeze.

(3) Remove the expandable tank and pour the liquid out of it.

4) Fill the radiator with distilled water for washing.

(5) Apply the leak tight to the filler cap and wrap it in place.

6) End the heat sink filler cap.

(7) Put the expandable tank in place.

(8) Removal of the bolt to remove air from the system.

9) Fill out a new antifreeze until it starts out of the screw hole.

10) A new gasket and a curling bolt.

11) Slowly fill the radiator into the filler throat.

12) To pour antifreeze into the expansion tank to the highest level.

13) Close the covers and start the engine. Let' s get him to warm up to his working temperature.

14) Several times the gas pedal and jamming engine.

15) We let the engine cool, check the level of antifreeze and if necessary,

Add comment