Do not wait for the water pump to become unbuilt and need to be changed when the gas distribution mechanism is replaced. In the case of a pump outlet, it may fill the coolant with the belts and spoil them. For access to the pump it is necessary to remove the fastenings of the hinged equipment and the GRM. To install the pump, you can use a pad included in the kit or you can install a pomp with a leak. By the word, when the car is produced, the water pump is installed through the sealant.
You need to leak anti-freeze before you start working. Then it is necessary to remove the belt of the RMU and spin off 6 bolts that hold the water pump. When the bolts are swolled, the pump must be turned off with a facial screwdriver and removed. Before installing a new pump, we need to carefully wash and displace the spirit-containing tool. Then you can install the new pump on the sealant or the gasket. If the pump is fitted with sealant, it is necessary to wait a couple of hours before the new antifreeze is flooded.