To cleanse the fuel filter, you need a radiator cleaner (you have to select one that is not aggressive to plastic), a penknife, a set of keys with heads and keyholes, a Phillips screwdriver.
First, we need to remove the backseat to access the pump on the pump. It is then possible to open a chlug (if it has not been opened earlier, it is secured to the sealant). Now we need to turn off the power of the gas pump and the supply tube. This has to be done carefully, since all the connections are made of plastic. Now you can remove the pump and unmount the seepel. The point is to be loaded into the carburetor cleaning capacity and give it half an hour to be covered by the same means, under the pressure from the spray. Before you install, you need to drain the splits within 30 minutes by putting it on a blank sheet of paper. You can then gather everything in reverse order.