Check the tensioning of the belt on Lifan Smiley in the following locations
- The deflection A shall be 8.5-10.5 mm (new belt) 10-12 mm (working belt).
- The deflection shall be 6-7 mm (new belt) 8.5-9.5 mm (working belt).
- The deflection C shall be between 5 mm and 6 mm (new belt) 6-8 mm (working belt).
- We're taking out the ASB.
- Looser the top and bottom bolt of the generator with a key of 13.
If the tension does not comply with the normative, regulate it.
Adjust the tensioning of the generator's belt:
- The bolts of the anticlockwise screw clockwise 13 until the normal curvature is reached.
- tightening the mounting bolts.
- Loosin the lock-retaining bolts with a key for ten.
- Tightback the adjustment nut switch clockwise with the key to 13.
Tension in the tensioning of the GRM:
- tightening the bolt.
- The key is a 14-year-old hard-ass clip of a belt.
Adjustment of the tensioning of the air-conditioner:
- Head on 13 through the extension cord by tightening the bolt bolt clockwise.
- Tightback the nut of the tenor.