The replacement of the generator bearings on the VAZ generator should be performed on the removed generator, so the first case is to dismount the VAZ generator. Most of the VAZ models (2105, 2106, 2107, 2108, 2109, 21099, 2110, 2111, 2112, 2113, 2114, 2115, Kalina, Pryora, etc.) are almost the same, so the principle of replacement of bearings for different LADA models is the same. To understand the generator and change the front and rear bearing, you need the following tools: Head key 8 ,printhead for 27,deep head on 19 ,big rockkey, flat-blade screwdriver.
- end key at 8
- Head for 27,
- deep head on 19,
- large horny key,
- flat-blade screwdriver.
The procedure for replacing the VAZ generator bearings is as follows:
1. The first step is to mark the token with the position of the generator covers (draw a straight line that will connect the two covers).
