The intake manifold shall be filmed as follows:
1) Disconnect the crankcase ventilation hose from the throttle.
2) Disconnect the pedal cable.
3) Disconnect from the throttle nozzle of the cooling system.
4) Crankcase ventilation hose and brake amplifier hose.
5) Shooting of the amplifier hose.
6) Remove the cover of the nozzles.
(7) Reset pressure in the fuel system and disconnect the fuel hose.
8) Connect the nozzles of the nozzles.
9) The collector shall be taken together with the nozzle.
10) The installation shall be done in reverse order. In doing so, it is necessary to replace the reservoir laying. The moment of tightening of the anchorage-15-20 Nm, nuts-30-42 Nm.
