The replacement of the engine oil on the Ford Mondeo III is recommended every 20,000 km for petrol engines and 15,000 km for diesel. The replacement of the oil should be made on a fully heated engine so that the dirt particles rise from the oil pan and into the bath tub. To lift the car and fix it in a horizontal position. Set the waiting area under the drain hole. Attention: boiling hot oil!Install a new rubber sealant on the screw filler cap. Then empty the receiver and put it under the oil filter. In the "Duratec-Ve" engine, it is better to free the filter by means of a key for rods. Ford Mondeo III with a four-cylinder engine has a filter holder that needs to be removed from the filter casing.Check the oil filter and the threaded plug for the oil leak-tightness.
- You can pick up the car and lock it in the horizontal position.
- Set the receptacle under the drain hole.
- Teach the threaded plug of the oil-filler hole with a nakyd key and drain the waste oil. Attention: boiling hot oil!
- Install a new rubber sealant on a threaded plug of the oil filler.
- Then empty the waiting room and put it under the filter.
- In the motor "Duratec-Ve", the filter is better free with the key for the rod handles. Ford Mondeo III with a four-cylinder engine has a filter holder to extract from the filter body.
- Before the filter is disposed of, the holder should also be released from the waste oil with the receptacle.
- To install a new filter, grease the rubber sealant, and tighten the filter firmly.
- Fill in the required quantity of oil, briefly start the engine and wait for the oil pressure control lamp to go out (means the oil filter is full).
- Check the oil filter and the threaded plug for the oil leak-tightness.
