To check the current for the ignition system on the Ford Mondeo III, you must: disconnect any tequer and turn off the spark plug. Put the plug on the dismantled candle and put the candle in the back with the plug on the cylinder block. When you start the candle, you don't have to crawl. Ask the assistant to start the engine.
- Detach any tequer and get the spark plug back.
- Put a glass on the dismantled candle and put the candle together with the tequer to the cylinder block. At the start of the candle, the candle must not slide.
- Ask the assistant to start the engine.
If there are strong bits in the candle electrodes and the sound of cracking, the current of ignition is available. If you don't get the digits, you need to check the ignition.
