To dismantle the fuel pump on the Ford Mondeo III, you need to: Unlink ACBA. Then empty the fuel tank and dismount it. Remove the supply and discharge pipes, as well as the connecting wire. Carefully release the fastening ring using the tool "ford 23055". by turning it counterclockwise. To mount a new pump, use a new rubber sealant. Clear all the compacting surfaces and put all the labels on the tank and the fuel pump against each other. Tighter the pressure ring with 80 Nm.
- Disconnect the ALB.
- Then, empty the fuel tank and dismantle it.
- Remove the supply and discharge piping, as well as the connecting line.
- Carefully release the fastening ring using the tool "ford 23055".
- Pull the pump out of the tank, counterclockwise.
- To install a new pump, use a new rubber sealant.
- Clear all sealing surfaces and display all the labels on the tank and fuel pump against each other.
- tighten the safety ring at the time of 80 Nm.
- Complete the installation in reverse order.
