Sometimes Fusion doesn't have a "spin" starter in the cold when you try to start a motor in the cold. The problem is, the Bendix doesn't want to be coupled with the flywheel. To solve this problem, you have to get to the starter. The first thing to do is to remove the terminals from the battery, and then unscrew the three bolts, retaining the restraint starter, and remove it from the seat. You must then disconnect the wiring slots from the starter. That's what the starter has to turn over.
After the starter is retrieved, you need to check the bendix. It shall be rotated freely in one direction only and shall be placed in rotation. There's a great chance that a Bendix will be difficult to pull off, and he won't run. These are signs that the Bendix needs to be cleaned.
To do this, you need to remove the starter motor and the wiring that is connected to the retractor. The Bendix and the gearbox should be cleaned with the injector cleaner. When cleaning up the Bendix, you have to develop. After cleaning and reassembly, the car should be easily curable.
