The Caliber throttle can be cleaned without being dismantled.
You do this in the following sequence:
1. Start the engine, warm it up to the operating temperature and shut it down.
2. Unmount the battery cover.
3. To remove the air intake duct, remove the air filter body.
4. A tube with a length of about 50 cm long must be fitted to the tube at the end of the tube, at the end of which the throttle control is fitted.
5. Request an assistant to start the engine and periodically increase the turnover to 4000, at this time a spray cleaner at the throttle.
6. To remove the residue of the purifier and the coke from the shale.
7. Reverse all order. The order number for the original throttle Chrysler-04891 735AC.
