If the steering wheel on TOYOTA CRUISER 200 has shifted relative to the central position, it is primarily necessary to determine the degree of displacement. To do this:
(1) The upper part of the centre of the steering wheel and the cover of the steering column.
2) Drive about 100 metres at a speed of about 60 km/h, fixing the straight line movement.
3) Marker draw a line along the duct from the steering column to the steering wheel.
(4) Set the rudder to the centre position and draw the second line on the scotch.
(5) The distance between the two lines will give a rudder displacement of 1 mm approximately equal to 10.
(6) Adjust the steering wheel position by means of adjustment hakes on the steering gear. We slay them and then spin them on the same size, but in different directions. One full rotation of the nut (360 degrees) corresponds to an adjustment of the steering wheel angle by 110.
